To Next Page

To Previous Page

2-52

AX-4030

AUTION MAX AX-4030 OPERATING MANUAL

5. Results Obtained with the Test Strip

Example

■ Abnormal mark

Abnormal results obtained with the test strips are flagged with an asterisk (*) or exclamation mark

(!). The exclamation mark flag has a higher priority than the asterisk flag.

(Blank) Normal (negative)

* Abnormal value (positive)

! Abnormal color (positive)

■ Qualitative value

Qualitative values are represented as “NORMAL” or as a plus (+) or minus (-) assigned numeric

value.

■ Semiquantitative value/reflectivity

A semiquantitative value is the concentration and its unit.

REFERENCE: The qualitative or semiquantitative values appear by default, however they

can be replaced with qualitative value and reflectivities. For instructions, see “3.2.2 Using a

Different Results Format” on page 3-4.

6. Turbidity

REFERENCE: The turbidity measurement value is added if the result format is set to

[Reflectivity] (see “3.2.2 Using a Different Results Format” on page 3-4).

■ Abnormal turbidity mark

The result is flagged with an asterisk (*) if it is abnormal. Normal results are printed with no

abnormal marks.

■ Qualitative values

Qualitative values are shown as follows:

Clear -

Turbid 1+

Dense turbid 2+

■ Error

If an incorrect turbidity result is obtained, either of the following messages will be added. For more

information, see “5.4.3 Turbidity Measurement-Related Errors” on page 5-20.

CAL. ERR. The calibration result of the turbidity meter is abnormal.

ERROR Turbidity measurement was not performed for some reason.

*GLU 4+ OVER mg/dl

!PRO 3+ 300 mg/dl

Arkray AUTION MAX AX-4030 User Manual

Questions and Answers: