Technical Specifications
194
PowerMac
Torque UCLr 9999.0
Torque CP > 0.0
Torque CPK > 0.0
Torque CAM > 0.0
Torque diff. % < 9999.0
Angle min. Read from controller
Angle max. Read from controller
Angle LCLx Read from controller
Angle UCLx Read from controller
Angle LCLr Read from controller
Angle UCLr Read from controller
Angle CP > 0.0
Angle CPK > 0.0
Angle CAM > 0.0
Angle diff. % < 9999.0
No. of pulses min. 0
No. of pulses max. 9999
Parameter 1 Torque
Statistical parameter 1 Contr., Diff.
Torque units Read from controller
Pulse units Pulse units set by Config.
Parameter 2 None (If transducer has an angle encoder: Angle)
Statistical parameter 2 None (If transducer has an angle encoder: Contr., Diff.)
Comments row 1
Comments row 2
To Next Page
Loading...
