Version 6.2 165 February 2011
SIP User's Manual 3. Web-Based Management
Parameter Description
Destination Address
[IP2IPRouting_DestAddress]
The destination IP address (or domain name, e.g.,
domain.com) to where the call is sent.
Notes:
This parameter is applicable only if the parameter
'Destination Type' is set to 'Dest Address' [1].
When using domain names, enter a DNS server IP
address or alternatively, define these names in the
'Internal DNS Table' (see ''Configuring the Internal SRV
Table'' on page 88).
Destination Port
[IP2IPRouting_DestPort]
The destination port to where the call is sent.
Destination Transport Type
[IP2IPRouting_DestTransportType]
The transport layer type for sending the call:
[-1] Not Configured (default)
[0] UDP
[1] TCP
[2] TLS
Note: When this parameter is set to -1, the transport type is
determined by the parameter SIPTransportType.
To Next Page
Loading...
