SIP User's Manual 372 Document #: LTRT-65415
MediaPack Series
Parameter Description
Web: Account Table
EMS: SIP Endpoints > Account
[Account]
This ini file table parameter configures the Account table for
registering and/or authenticating (digest) Hunt Groups (e.g., an
IP-PBX) to a Serving IP Group (e.g., an Internet Telephony
Service Provider - ITSP). The format of this parameter is as
follows:
[Account]
FORMAT Account_Index = Account_ServedTrunkGroup,
Account_ServedIPGroup, Account_ServingIPGroup,
Account_Username, Account_Password, Account_HostName,
Account_Register, Account_ContactUser,
Account_ApplicationType;
[\Account]
For example:
Account 1 = 1, -1, 1, user, 1234, acl, 1, ITSP1;
Notes:
This table can include up to 10 indices (where 1 is the first
index).
The parameter Account_ApplicationType is not applicable.
The parameter Account_ServedIPGroup is not applicable.
You can define multiple table indices with the same
ServedTrunkGroup but different ServingIPGroups,
username, password, HostName, and ContactUser. This
provides the capability for registering the same Hunt Group
to several ITSP's (i.e., Serving IP Groups).
For a detailed description of this table's parameters and for
configuring this table using the Web interface, see
''Configuring Account Table'' on page 113.
For an explanation on using ini file table parameters, see
''Configuring ini File Table Parameters'' on page 194.
Proxy Registration Parameters
Web: Use Default Proxy
EMS: Proxy Used
[IsProxyUsed]
Enables the use of a SIP proxy server.
[0] No = Proxy isn't used and instead, the internal routing
table is used (default).
[1] Yes = Proxy server is used. Define the IP address of the
proxy server in the 'Proxy Sets table' (see ''Configuring
Proxy Sets Table'' on page 106).
Note: If you are not using a proxy server, you must define
outbound IP call routing rules in the 'Tel to IP Routing'
(described in ''Configuring Tel to IP Routing'' on page 138).
Web/EMS: Proxy Name
[ProxyName]
Defines the Home Proxy domain name. If specified, this name
is used as the Request-URI in REGISTER, INVITE, and other
SIP messages, and as the host part of the To header in INVITE
messages. If not specified, the Proxy IP address is used
instead.
The value must be string of up to 49 characters.
Web: Redundancy Mode
EMS: Proxy Redundancy Mode
[ProxyRedundancyMode]
Determines whether the device switches back to the primary
Proxy after using a redundant Proxy.
[0] Parking = device continues working with a redundant
(now active) Proxy until the next failure, after which it works
To Next Page
Loading...
Need help?
General
