Version 6.2 487 February 2011
SIP User's Manual 10. Configuration Parameters Reference
Parameter Description
the other parameters) is applied to the call.
Redirect number manipulation for Tel-to-IP calls is not
performed if the CopyDest2RedirectNumber
parameter is enabled. This parameter copies the
received destination number to the outgoing redirect
number.
The following parameters are not applicable:
NumberType, NumberPlan, and
IsPresentationRestricted.
Web: Destination Phone Number Manipulation Table for Tel to IP Calls
EMS: SIP Manipulations > Destination Telcom to IPs
[NumberMapTel2IP]
This ini file table parameter manipulates the destination
number of Tel-to-IP calls. The format of this parameter is
as follows:
[NumberMapTel2Ip]
FORMAT NumberMapTel2Ip_Index =
NumberMapTel2Ip_DestinationPrefix,
NumberMapTel2Ip_SourcePrefix,
NumberMapTel2Ip_SourceAddress,
NumberMapTel2Ip_NumberType,
NumberMapTel2Ip_NumberPlan,
NumberMapTel2Ip_RemoveFromLeft,
NumberMapTel2Ip_RemoveFromRight,
NumberMapTel2Ip_LeaveFromRight,
NumberMapTel2Ip_Prefix2Add,
NumberMapTel2Ip_Suffix2Add,
NumberMapTel2Ip_IsPresentationRestricted,
NumberMapTel2Ip_SrcTrunkGroupID,
NumberMapTel2Ip_ SrcIPGroupID;
[\NumberMapTel2Ip]
For example:
NumberMapTel2Ip 0 =
01,$$,*,0,0,2,$$,$$,971,$$,$$,$$,$$;
NumberMapTel2Ip 1 =
10,10,*,255,255,3,0,5,100,$$,255,$$,$$;
Notes:
This table parameter can include up to 120 indices (0-
119).
The manipulation rules are done in the following order:
RemoveFromLeft, RemoveFromRight,
LeaveFromRight, Prefix2Add, and then Suffix2Add.
If the called and calling numbers match the
DestinationPrefix and/or SourcePrefix conditions, then
the parameters RemoveFromLeft, RemoveFromRight,
Prefix2Add, Suffix2Add, and/or LeaveFromRight are
applied.
The following parameters are not applicable:
SrcIPGroupID, NumberType, NumberPlan,
SourceAddress and IsPresentationRestricted.
To configure manipulation of destination numbers for
Tel-to-IP calls using the Web interface, see
''Configuring the Number Manipulation Tables'' on
page 129).