Avaya 1230 - Page 162

Table 30: DHCP configuration
DHCP : No ▼
No
Yes
10. If DHCP is disabled, select SET IP in the Device Settings menu to configure the IP address.
Table 31: SET IP configuration
SET IP : 0.0.0.0
11. If DHCP is disabled, configure Net Mask and Gateway. Enter a subnet mask in the Net Mask
field and enter the IP address of the local gateway in the Gateway field.
Table 32: Net Mask and Gateway configuration
Net Mask : 0.0.0.0
Gateway : 0.0.0.0
12. If DHCP is not Full DHCP, to configure the DNS enter the IP address of the local DNS
servers DNS IP1 and DNS IP2.
Table 33: DNS configuration
DNS IP1 : 0.0.0.0
DNS IP2 : 0.0.0.0
13. Configure Ntwk Port Speed in the Device Settings menu.
Use the right arrow in the Navigation key cluster to highlight the Ntwk Port Speed box. Press
the Select key to access a list of Ntwk Port Speed choices:
• Auto
• 10BT
• 100BT
Scroll through the list with the Up/Down arrows and select the appropriate parameter. Press
the Select key to select a Ntwk Port Speed.
Table 34: Ntwk Port Speed configuration
Ntwk Port Speed :
Auto ▼
Auto
10BT
100BT
14. Configure Ntwk Port Duplex in the Device Settings menu.
Device Settings on the IP Deskphone with SIP Software
162 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com