Avaya 1230 - Page 79

• ADHOC_ENABLED [YES | NO] — This parameter configures support for ad hoc conferencing
for the Call Server. The default value is NO. If a service package is used then this is provided
by the service package.
- x – the SIP domain number from 1 to 5
- YES – the Call Server supports ad hoc conferencing.
- NO – the Call Serverr does not support ad hoc conferencing.
• MAX_ADHOC_PORTS[x] [max_ports_number] — This parameter configures the maximum
number of adhoc conference participants that can join the conference on the IP Deskphone.
- x – the SIP domain number from 1 to 5
- max_ports_number - number of participants from 0 to 4. The default value is 0.
• INTERCOM_PAGING [YES | NO] — allows the IP Deskphone to belong to a paging group.
When a page group call is received, a one-way speech path is created to the IP Deskphone,
and the IP Deskphone automatically goes to a hands-free intercom state.
- YES - intercom/paging functionality is enabled.
- NO - intercom/paging functionality is disabled.
• LOGOUT_WITHOUT_PASSWORD [YES | NO] — allows the user to log off without entering
their password if the administrator enables LOGOUT_WITHOUT_PASSWORD feature.
- YES - enables the user to logout without a password.
- NO - does not allow the user to logout without a password.
• REMOTE_CHECK_FOR_UPDATE [YES | NO] — provides the functionality to start a check to
remotely update the IP Deskphone with the latest software present on the Trivial File Transfer
Protocol (TFTP) server. You can enable or disable this feature with the flag present in the
Device Configuration file. By default, this flag is set to NO.
- YES - prompt the user about the scheduled event and the user can accept or reject the
scheduled software update check by pressing the YES or NO soft key.
- NO - disables the remote check for update option.
• SECURE _INCALL_DIGITS [YES | NO] — shows the typed digits as asterisks when the user
makes a call into the voice mail. When this feature is enabled, the most recently-pressed key is
displayed but is overwritten by an asterisk (*) when the next key is pressed. The user has the
option to Hide or Unhide the digits typed.
- YES - provides the secure digits while in call functionality.
- NO - disables the secure digits while in call functionality.
• E911_TERMINATE_ENABLE [YES | NO] — specifies whether a 911 call can be terminated by
the calling party or not. The default value is NO.
- YES — the caller can terminate the emergency call.
- NO — the caller cannot terminate the emergency call once the call has been established.
Create the device configuration file
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 79
Comments? infodev@avaya.com