• E911_USERNAME — an emergency username used for making an emergency call that does
not require login. The proxy must be configured with the same emergency username;
otherwise, the emergency call fails.
• E911_PROXY — a default emergency proxy. This variable must contain the value that
matches the value defined by one of the following variables specified in the same config file:
- SIP_DOMAIN1
- SIP_DOMAIN2
- SIP_DOMAIN3
- SIP_DOMAIN4
- SIP_DOMAIN5
If E911_PROXY does not match the value defined by these five variables, or the variable
E911_PROXY is not defined, then the value of SIP_DOMAIN1 is used as the emergency
proxy.
• E911_PASSWORD — the password for the emergency username that is used for making an
emergency call that does not require login. The proxy must be configured with the same
password; otherwise the emergency call fails.
• E911_TXLOC is the variable that describes location information that must be sent with the
REGISTER SIP message, or with the INVITE SIP message.
• E911_HIDE_MESSAGE [Y | N] — This parameter configures whether or not the message
“Emergency Calls Only” is displayed when no user is logged in and the IP Deskphone is taken
off-hook.
The default is NO, which means that the Emergency Calls Only message is not hidden; it is
displayed on the IP Deskphone when no user is logged in and the IP Deskphone is taken
offhook.
• KEEP_ALIVE_TYPE [type_string] — This parameter indicates if OS keep-alive on the
connection is enabled.
The supported values are OS or CRLF (or any string). The default value is OS.
— type_string - the keep-alive mode value
• CONN_KEEP_ALIVE [conn_keep] — This parameter configures the time in seconds to use
for the keep-alive.
The values are from 5 to 1800 seconds. The default value is 120 seconds.
— conn_keep - keep-alive time in seconds
• MENU_AUTO_BACKOUT — a menu auto back-out time preference configuration used to
configure the auto back-out time on newly created profiles (not for profiles that already exist).
The values, in seconds, are 0, 15, 30, 60, 120, 300, 600. The default value is 30.
Example:
MENU_AUTO_BACKOUT 15
Creating the provisioning files
80 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com
To Next Page
Loading...
