Azbil C1M - Event Display Setup; Event Remaining Time Display Setup

5-97
Chapter 5. Functions

Event display setup
Whether to show the main- and sub-settings of internal events 1–3 on the operation
display can be selected.
Item (bank) Display Description Initial value User level
EV display setup
(setup bank)
C 76
0: Do not show internal event settings on
the operation display
1: Show internal event 1 settings on the
operation display
2: Show internal event 1–2 settings on the
operation display
3: Show internal event 1–3 settings on the
operation display
0 Standard,
advanced
Handling Precautions
• Even if internal event settings are set to be displayed, they are not
displayed if an internal event operation type that does not require main-
and sub-settings is specified.
• The main- and sub-settings of internal events 4–5 cannot be displayed on
the operation display.

Event remaining time display setup
Whether to show the ON/OFF delay remaining time of internal events 1–3 on the
operation display can be selected.
Item (bank) Display Description Initial value User level
Event remaining time display
setup
(setup bank)
C 77
0: Do not show the ON/OFF delay
remaining time of internal events on
the operation display
1: Show the ON/OFF delay remaining time
of internal event 1 on the operation
display
2: Show the ON/OFF delay remaining time
of internal events 1–2 on the operation
display
3: Show the ON/OFF delay remaining time
of internal events 1–3 on the operation
display
0 Standard,
advanced
Handling Precautions
• Even if the internal event remaining time is set to be displayed, it is not
displayed if an internal event operation type that does not require display
of the remaining time is specified.
• The remaining time of internal events 4–5 cannot be displayed on the
operation display.