Azbil C1M - Main Setting, Sub-Setting,Hysteresis

5-65
Chapter 5. Functions

Main setting, sub-setting,hysteresis
The main setting, sub-setting, and hysteresis associated with operation type can be set.
Item (bank) Display Description Initial value User level
Internal event 1 main setting
(event bank)
E1
−1999 to +9999
The number of decimal places in the PV
changes according to the operation type.
For some operation types, the range is
0–9999.
0 Simple,
standard,
advanced
Internal event 1 sub-setting
(event bank)
E1.sb
−1999 to +9999
The number of decimal places in the PV
changes according to the operation type.
For some operation types, the range is
0–9999.
0
Internal event 1 hysteresis
(event bank)
E1.HY
0 to 9999
The number of decimal places in the PV
changes according to the operation type.
5
Internal event 2 main setting
(event bank)
E2
Same as internal event 1 main setting 0
Internal event 2 sub-setting
(event bank)
E2.sb
Same as internal event 1 sub-setting 0
Internal event 2 hysteresis
(event bank)
E2.HY
Same as internal event 1 hysteresis 5
Internal event 3 main setting
(event bank)
E3
Same as internal event 1 main setting 0
Internal event 3 sub-setting
(event bank)
E3.sb
Same as internal event 1 sub-setting 0
Internal event 3 hysteresis
(event bank)
E3.HY
Same as internal event 1 hysteresis 5
Internal event 4 main setting
(event bank)
E4
Same as internal event 1 main setting 0
Internal event 4 sub-setting
(event bank)
E4.sb
Same as internal event 1 sub-setting 0
Internal event 4 hysteresis
(event bank)
E4.HY
Same as internal event 1 hysteresis 5
Internal event 5 main setting
(event bank)
E5
Same as internal event 1 main setting 0
Internal event 5 sub-setting
(event bank)
E5.sb
Same as internal event 1 sub-setting 0
Internal event 5 hysteresis
(event bank)
E5.HY
Same as internal event 1 hysteresis 5
• If internal event configuration 1 operation type is set to 0 (no event), internal
event main setting, sub-setting, and hysteresis are not displayed.
•
For the operation of internal events according to the main setting, sub-setting,
and hysteresis, see Operation (p.5-56 to 5-61.)