Azbil C1M - User Function Bank

6-38
Chapter 6. Displayed Items and Settings

User function bank
Bank selection: UF
Display Item Description Initial
value
User
level
Notes
UF-1
User function 1 Displayed characters are defined for
each item. The following are special
cases.
---- : Unregistered
P-_: Proportional band of the PID in
use
I-_: Integral time of the PID in use
d-_: Derivative time of the PID in use
rE-_: Manual reset of the PID in use
OL-_: MV low limit of the PID in use
OH-_: MV high limit of the PID in use
P-_C: Proportional band for cooling of
the PID in use
I-_C: Integral time for cooling of the PID
in use
d-_C: Derivative time for cooling of the
PID in use
OL._C: MV low limit for cooling of the PID
in use
OH._C: MV high limit for cooling of the
PID in use
- - - - 1 Only the settings that can be
displayed can be registered. (For
example, manual reset of the
PID constants can be registered
when integral time = 0)
Registered settings are added
to the end of the list of settings
that are shown on the operation
display.
UF-2
User function 2 - - - - 1
UF-3
User function 3 - - - - 1
UF-4
User function 4 - - - - 1
UF-5
User function 5 - - - - 1
UF-6
User function 6 - - - - 1
UF-7
User function 7 - - - - 1
UF-8
User function 8 - - - - 1