Azbil C1M - Parameter Settings; Mode Bank

6-3
Chapter 6. Displayed Items and Settings
Meaning of user level settings
0: Simple configuration, 1: Standard configuration, 2: Advanced configuration

Mode bank
Bank selection: MODE
Display Item Description Initial
value
User
level
Notes
A--M
AUTO/MANUAL
mode selection
AUtO: AUTO mode
MAn: MANUAL mode
AUTO 0 Displayed if the control method
is PID control (CtrL = 1).
Whether to display can be
selected by the mode display
setting (C73).
R--R
RUN/READY mode
selection
rUn: RUN mode
rdy: READY mode
RUN 0 Whether to display can be
selected by the mode display
setting (C73).
AT
AT start/stop
selection
At.OF: AT stop
At.On: AT start
AT stop 0 Displayed if the control method
is PID control (CtrL = 1).
Whether to display can be
selected by the mode display
setting (C73).
At.Er
Auto tuning error
Er.OF: Normal
Er.ON: Abnormal
Normal 0 Displayed if the control method
is PID control (CtrL = 1).
Whether to display can be
selected by the mode display
setting (C73).
DOLT
Release all DO
latches
Lt.On: Latch continue
Lt.OF: Latch release
Latch
continue
0 All DOs for control outputs
(relay, voltage pulse) and event
outputs can be unlatched.
Whether to display can be
selected by the mode display
setting (C73).
Udb.1
User-defined bit 1
db.OF: OFF
db.On: ON
OFF 0 Whether to display can be
selected by the mode display
setting (C73).
6 - 2 Parameter Settings