Azbil C1M - Page 164

6-2
Chapter 6. Displayed Items and Settings
Display Item Description Initial
value
User
level
Notes
T1
Timer remaining
time 1
Setting cannot be changed
The rightmost digit shows % for ON delay
and L for OFF delay.
- 0 Whether to display can be
selected by the timer remaining
time display setting (C77).
E2
Internal event 2
main setting
The range of settings differs depending
on the operation type of the internal
event.
0 to 9999 U: An absolute value is set
−199.9 to + 999.9 %: MV
−1999 to +9999 U: Other than the above
0 0 The settings required for
the internal event type are
displayed.
Whether to display can be
selected by the event display
setting (C76).
E2.SB
Internal event 2
sub-setting
0 0
T2
Timer remaining
time 2
Setting cannot be changed
The rightmost digit shows % for ON delay
and L for OFF delay.
- 0 Whether to display can be
selected by the timer remaining
time display setting (C77).
E3
Internal event 3
main setting
The range of settings differs depending
on the operation type of the internal
event.
0 to 9999 U: An absolute value is set
−199.9 to + 999.9 %: MV
−1999 to +9999 U: Other than the above
0 0 The settings required for
the internal event type are
displayed.
Whether to display can be
selected by the event display
setting (C76).
E3.sb
Internal event 3
sub-setting
0 0
T3
Timer remaining
time 3
Setting cannot be changed
The rightmost digit shows % for ON delay
and L for OFF delay.
- 0 Whether to display can be
selected by the timer remaining
time display setting (C77).
* The rightmost digit