Azbil C1M - Release All DO (Digital Output) Latches; User-Defined Bit 1

5-13
Chapter 5. Functions

Release all DO (digital output) latches
Whether to release all DO (digital output) latches can be set.
Item (bank) Display Description Initial value User level
Release all DO (digital output)
latches (mode bank)
do.Lt
Lt.On(0): Latch continue
Lt.OF(1): Latch release
Lt.On
Simple,
standard,
advanced
• If the operation type of any of internal contacts 1 to 5 is set to 18 (release/
continue all DO latches), doLt (release all DO latches) is displayed but the setting
cannot be changed with the keys.
• If “Bit 4: release all DO latches display” of C73 (mode display setup) is set to 0
(disabled), doLt (release all DO latches) is not displayed and the setting cannot be
changed with the keys.

User-defined bit 1
User-defined bit 1 can be turned on or off.
Item (bank) Display Description Initial value User level
User-defined bit 1
(mode bank)
Udb.1
db.Of(0): User defined bit 1 is OFF.
db.On(1): User defined bit 1 is ON.
db.Of
Simple,
standard,
advanced
• There are four user-defined bits, 1 to 4, but only user-defined bit 1 can be turned
on or off using the keys.
• A function (operation) can be set for user-defined bit 1 in the DI assignment
bank.
• If “Bit 5: user-defined bit 1 ON/OFF display” of C73 (mode display setup) is set to
0 (disabled), Udb.1 (user-defined bit 1) is not displayed and the setting cannot be
changed.