2-8
Chapter 2. Outline of Functions
Handling Precautions
• If C72 ([MODE] key function) in the setup bank is set to 0 (invalid), or if the
specified switching operation is disabled, switching using [MODE] is not
possible.
• If you press [MODE] when the screen for specifying settings (parameters,
setup items, etc.) is displayed, this device shows the operation display,
but continuing to press [MODE] will not change the setting. In this case,
release [MODE] temporarily and then press it again.
User level
The user level can be selected from three options (simple, standard, advanced) with
C79 (user level) in the setup bank.
Chapter 6. Displayed Items and Settings (for items that are displayed
according to the user level)
Handling Precautions
• If the user level is changed, the displayed items will change but settings
that have been made will remain valid. For example, if you set the user
level to 2 (standard configuration) or 3 (advanced configuration) in order
to configure advanced functions and then return the setting to 1 (simple
configuration), the settings available for 2 and 3 will not be displayed, but
the new settings will apply to the advanced functions.
To Next Page
Loading...
