11-1
Chapter 11. Maintenance and Troubleshooting
WARNING
To remove dirt from this device, wipe it with a soft dry cloth.
Never use an organic solvent such as paint thinner or benzene, or a detergent.
Do not use this device in wet places or with wet hands.
There is a danger of electric shock.
Maintenance
z
Cleaning
To remove dirt from this device, wipe it with a soft dry cloth.
Never use an organic solvent such as thinner or benzene.
z
Parts replacement
Do not replace any parts of this unit.
z
Fuse replacement
When replacing the fuse connected to the electric wiring, always use the specified
standard fuse.
Standards compliance: IEC 60127
Speed: time-lag (T)
Rated voltage: 250 V AC
Rated current: 0.5 A
To Next Page
Loading...
