Best GENIUS Compact - V. Routine Operational Procedures (continued); 9.

To Next Page

To Previous Page

5/22

Chapter 5: Routine Operational Procedures

Operators & Maintenance Manual GENIUS Compact Version UK 0.1 © BESTnv

BESTnv Industrial Research BV, Marinus van Meelweg 20, 5657 EN, EINDHOVEN, THE NETHERLANDS

General tel. +31 (40) 292 2622 - Service tel. +31 (40) 292 2620 - Fax. +31 (40) 292 2633 - Email: service.BESTnv@bestnv.com

9. - Set the Overlap (Neighbour valves)

To set the overlap, press the value after the title Neighbour valves. A pop-up screen will appear (see

picture below).

Positive Overlap (+1 to +10):

The value +1 means that one extra air gun valve at both sides of the detected defect will ﬁ re.

For example: if a small defect spot is detected in the zone of only 1 air gun valve, the two neighbouring

valves will also ﬁ re.

This feature makes it possible to eject bigger/heavier products with small defect spots.

Best GENIUS Compact - V. Routine Operational Procedures (continued); 9. - Set the Overlap (Neighbour valves)