3
Setting Specifications That Are Common to Each Function (Common Settings)
3-11
Selecting and Storing Settings to Suit your Needs
Setting Entry Tone, Error Tone, and Job Done Tone
You can select whether or not to sound audible tones. The following tones sound at the
following times:
• Entry Tone: When pressing keys on the control panel or keys on the touch panel display.
• Error Tone: When a malfunction occurs (e.g., paper jam or operational error).
• Job Done Tone: After the last copy has been made (e.g., outputting, stapling, or faxing is
completed).
NOTE
• The default setting is “On” for all tones.
1
Call up the desired screen as follows:
2
Select “On” or “Off” for Entry Tone, Error Tone, and Job Done Tone,
and press “OK.”
3
Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
(Additional Functions)
Audible Tones
E1L_US_U_.book-INDEX Page 11 Wednesday, May 23, 2001 11:40 PM
To Next Page
Loading...
