1
About the Installation Location and Handling
1-6
Before You Start Using This Machine
Select a Safe Power Supply
■ Plug the machine into a 120V AC outlet.
■ Do not plug other electrical equipment into the outlet in which the machine is
connected.
■ Do not plug the machine into a multi-plug power strip. Doing so might cause a fire.
■ The power cable may become damaged if it is often stepped on or if heavy objects
are placed on it. Continued use of a damaged power cable can lead to an accident.
Provide Adequate Installation Space
■ Provide enough space on each side of the machine for unrestricted operation.
26-3/4"
678mm
57-7/8"
(1469mm)
4" or more (100 mm)
32-3/4"
(830 mm)
4" or more (100 mm)
26-3/4"
(678 mm)
■
When Finisher-J1 is
attached
■
When Saddle Finisher-G1 is
attached
E1L_US_U_.book-INDEX Page 6 Wednesday, May 23, 2001 11:40 PM
To Next Page
Loading...
