Setting Device Information (Device Information Settings)
4-24
System Manager Settings
4
Setting Device Information (Device Information Settings)
You can set a name for this machine and specify its location.
1
Call up the desired screen as follows:
When the System Manager ID/Password is set, enter the System Manager ID and System
Password after pressing “System Settings.” Then, press (ID).
2
Press “Device Name” and “Location” → enter the name of this
machine and the location where this machine is placed → press
“OK.”
The maximum number of characters which can be entered is 32.
NOTE
•
For details of how to enter characters, see ‘Entering Characters from the Touch Panel Display,’
on p. 1-31.
•
If you do not want to store the name and location, press “Cancel.”
3
Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
(Additional Functions)
E1L_US_U_.book-INDEX Page 24 Wednesday, May 23, 2001 11:40 PM
To Next Page
Loading...
