Periodic Inspection of the Breaker xxvi
Periodic Inspection of the Breaker
This machine has a breaker that detects excess current or leakage current. Be sure to test
the breaker once or twice a month using the following procedure.
IMPORTANT
•
Make sure that the main power is turned on, and the machine is neither printing nor scanning before
starting a periodic inspection of the breaker.
•
If a malfunction occurs after a periodic inspection, contact your service representative.
1
Push the test button with the tip of a ball-point pen, or similar object.
NOTE
•
The breaker is located near the power cord.
2
The breaker lever automatically goes to OFF (“ ” side). Confirm
that the power is cut OFF.
ON
I
side)(
OFF
side)(
E1L_US_U_.book-INDEX Page xxvi Wednesday, May 23, 2001 11:40 PM
To Next Page
Loading...
