Canon imageCLASS 2200 - Distinguishing LTRR-Size and STMT-Size Originals

3
Setting Specifications That Are Common to Each Function (Common Settings)
3-19
Selecting and Storing Settings to Suit your Needs
2 Select “Low” or “High,” and press “OK.”
3 Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
Distinguishing LTRR-size and STMT-size Originals
You can designate the way the machine handles LTRR-size or STMT-size originals placed on
the platen glass.
NOTE
• The default setting is “Use LTRR Format.”
1 Call up the desired screen as follows:
(Additional Functions)
LTRR/STMT Original Selection
E1L_US_U_.book-INDEX Page 19 Wednesday, May 23, 2001 11:40 PM