Placing Originals
1-39
Before You Start Using This Machine
1
Placing Originals
Set the originals on the platen glass or in the feeder, depending on the size and type that you
want to print and the settings that you have programmed.
NOTE
• If the original has too many pages to be placed in the feeder all at once during basic Copy/Mail
Box operations, use the Job Build mode. (See the Copying Guide and the Mail Box Function
Guide.)
■ Platen glass
Place the originals on the platen glass when scanning bound originals, originals on heavy
or lightweight paper, and transparencies.
■ Feeder
Place a stack of originals in the feeder, and press (Start). The machine automatically
scans them into memory. Two-sided originals can also be automatically turned over and
scanned as two-sided image data.
E1L_US_U_.book-INDEX Page 39 Wednesday, May 23, 2001 11:40 PM
To Next Page
Loading...
