Canon imageCLASS 2200 - Printing the Users Data List in the Network Settings

3
Printing Reports (Report Settings)
3-45
Selecting and Storing Settings to Suit your Needs
5 Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
Printing the User’s Data List in the Network Settings
You can print the user’s data list in the Network Settings when the Network Interface Adapter
is attached.
1 Call up the desired screen as follows:
2 Press “Network” under <Print List>.
When both the FAX Board and Printer Kit are not attached, and the Network Interface
Adapter is attached, this procedure is not necessary.
(Additional Functions)
When the FAX Board, Network
Interface Adapter, and Printer Kit
are attached
When the Network Interface
Adapter and Printer Kit are
attached
E1L_US_U_.book-INDEX Page 45 Wednesday, May 23, 2001 11:40 PM