3
Setting Specifications That Are Common to Each Function (Common Settings)
3-12
Selecting and Storing Settings to Suit your Needs
Setting Inch Input
You can display the key for entering values in inches in the numeric entry screens.
NOTE
• The default setting is “On.”
1
Call up the desired screen as follows:
2
Select “On” or “Off,” and press “OK.”
3
Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
(Additional Functions)
Inch Entry
E1L_US_U_.book-INDEX Page 12 Wednesday, May 23, 2001 11:40 PM
To Next Page
Loading...
