Canon imageCLASS 2200 - Saddle Finisher-G1; Puncher Unit-K1

8
Specifications
8-6
Appendix
Saddle Finisher-G1
Puncher Unit-K1
Paper
Finisher Unit: 17-Ib bond to 20-Ib bond (64g/m
2
to 80g/m
2
)
Saddle Stitcher Unit: 17-Ib bond to 20-Ib bond (64g/m
2
to 80g/m
2
)
Capacity per tray
Non-collate mode, Collate mode, Group mode
LTR, LTRR, STMT, STMTR: 1,000 sheets/5-3/4" (147mm)
11" x 17", LGL: 500 sheets/2-7/8" (74mm)
Staple mode
LGL, LTR, LTRR: 1000 sheets/4-3/8" (147mm)/30 sets
11" x 17": 500 sheets/2-7/8" (74mm)/30 sets
Saddle Stitch: 2 to 5 sheets/20 sets, 6 to 10 sheets/10 sets
Max. stapling capacity
Staple mode
LTR, LTRR: 50 sheets
11" x 17", LGL: 25 sheets
Saddle Stitch
2 to 10 sheets
Available staple size 11" x 17", LGL, LTR, LTRR
Available saddle stitch size 11" x 17", LTRR
Available offset size 11" x 17", LGL, LTR, LTRR, STMT
Saddle stitcher folding method Roller pressure folding
Saddle stitcher folding mode V-fold
Power source From main unit
Power consumption 33W
Dimensions (H x W x D) 33-5/8" x 21 x 23-3/4" (855mm x 532mm x 603mm)
Dimensions when attached to
the main unit (W x D)
57-7/8" x 26-3/4" (1,469mm x 678mm)
Weight Approx. 77.2 lb (35kg) (including the installation kit.)
Paper 17-Ib bond to 20-Ib bond (64g/m
2
to 80g/m
2
)
Hole punching system Sequential processing system
Punch hole quantity, hole
diameter
2 holes/3 holes, 8±0.5mm
Distance between punch
holes
3 holes: 4-1/4" (108mm)
2 holes: 2-3/4" (70mm)
E1L_US_U_.book-INDEX Page 6 Wednesday, May 23, 2001 11:40 PM