4
Setting the Department ID Management
4-11
System Manager Settings
3
Use “▼” and “▲” to display the Password you want to change →
select the Password → press “Edit.”
4
Enter the Password with - (numeric keys), and press “OK.”
To change Impression Limit, press “Impression Limit,” and enter the desired value
using - (numeric keys). Then press “OK.”
You cannot store a password with only the number <0>, such as <0000000>.
NOTE
•
The number you can set for Impression Limit is from 0 to 999999. Once the Impression Limit
is set, you cannot exceed the number entered.
•
A two-sided print is counted as <2>.
•
You cannot change the Department IDs.
E1L_US_U_.book-INDEX Page 11 Wednesday, May 23, 2001 11:40 PM
To Next Page
Loading...
