7
Saddle Finisher-G1/Puncher Unit-K1
7-53
Handling Options
IMPORTANT
•
When making prints with the Staple mode, do not remove the output sheets not yet stapled.
(Stapling will be performed after removing the jammed paper.)
2
Move the finisher away from the main unit.
3
Open the top cover of the finisher, and remove any jammed paper.
4
Close the top cover of the finisher.
E1L_US_U_.book-INDEX Page 53 Wednesday, May 23, 2001 11:40 PM
To Next Page
Loading...
