Cisco 500 Series Administration Guide

Security
Management Access Method
Cisco 500 Series Stackable Managed Switch Administration Guide 446
21
session, while another user group might be able to access the device
module by using both HTTPS and Telnet sessions.
Active Access Profile
The Access Profiles page displays the access profiles that are defined and
enables selecting one access profile to be the active one.
When a user attempts to access the device through an access method, the device
looks to see if the active access profile explicitly permits management access to
the device through this method. If no match is found, access is denied.
When an attempt to access the device is in violation of the active access profile,
the device generates a SYSLOG message to alert the system administrator of the
attempt.
If a console-only access profile has been activated, the only way to deactivate it is
through a direct connection from the management station to the physical console
port on the device.
For more information see Defining Profile Rules.
Use the Access Profiles page to create an access profile and to add its first rule. If
the access profile only contains a single rule, you are finished. To add additional
rules to the profile, use the Profile Rules page.
STEP 1 Click Security > Mgmt Access Method > Access Profiles.
This page displays all of the access profiles, active and inactive.
STEP 2 To change the active access profile, select a profile from the Active Access
Profile drop down menu and click Apply. This makes the chosen profile the active
access profile.
NOTE A caution message appears if you selected Console Only. If you
continue, you are immediately disconnected from the web-based
configuration utility and can access the device only through the console
port. This only applies to device types that offer a console port.
A caution message displays if you selected any other access profile, warning you
that, depending on the selected access profile, you might be disconnected from
the web-based configuration utility.
STEP 3 Click OK to select the active access profile or click Cancel to discontinue the
action.

Cisco 500 Series Specifications

General

Model	Cisco 500 Series
Category	Switch
Mounting	Rack-mountable
Management	Web-based, CLI, SNMP
Ports	24, 48
Port Speed	10/100/1000 Mbps
PoE Support	Available on some models
Switching Capacity	Up to 176 Gbps
MAC Address Table Size	16, 000 entries
Security	ACLs, 802.1X
Quality of Service (QoS)	Yes
Dimensions	Varies by model
Weight	Varies by model
Humidity	10% to 90% non-condensing
Power Supply	Internal
Power Consumption	Varies by model
Jumbo Frame Support	Up to 9216 bytes