Cisco 500 Series Administration Guide

23
Cisco 500 Series Stackable Managed Switch Administration Guide 511
Security: IPv6 First Hop Security
This section describes how IPv6 First Hop Security (FHS) works and how to
configure it in the GUI.
It covers the following topics:
• IPv6 First Hop Security Overview
• Router Advertisement Guard
• Neighbor Discovery Inspection
• DHCPv6 Guard
• Neighbor Binding Integrity
• IPv6 Source Guard
• Attack Protection
• Policies, Global Parameters and System Defaults
• Common Tasks
• Default Settings and Configuration
• Default Settings and Configuration
• Configuring IPv6 First Hop Security through Web GUI

Cisco 500 Series Specifications

General

Model	Cisco 500 Series
Category	Switch
Mounting	Rack-mountable
Management	Web-based, CLI, SNMP
Ports	24, 48
Port Speed	10/100/1000 Mbps
PoE Support	Available on some models
Switching Capacity	Up to 176 Gbps
MAC Address Table Size	16, 000 entries
Security	ACLs, 802.1X
Quality of Service (QoS)	Yes
Dimensions	Varies by model
Weight	Varies by model
Humidity	10% to 90% non-condensing
Power Supply	Internal
Power Consumption	Varies by model
Jumbo Frame Support	Up to 9216 bytes