Cisco 500 Series Administration Guide

29
Cisco 500 Series Stackable Managed Switch Administration Guide 632
SNMP
This section describes the Simple Network Management Protocol (SNMP) feature
that provides a method for managing network devices.
It covers the following topics:
• SNMP Versions and Workflow
• Model OIDs
• SNMP Engine ID
• Configuring SNMP Views
• Creating SNMP Groups
• Managing SNMP Users
• Defining SNMP Communities
• Defining Trap Settings
• Notification Recipients
• SNMP Notification Filters
SNMP Versions and Workflow
The device functions as SNMP agent and supports SNMPv1, v2, and v3. It also
reports system events to trap receivers using the traps defined in the supported
MIBs (Management Information Base).

Cisco 500 Series Specifications

General

Model	Cisco 500 Series
Category	Switch
Mounting	Rack-mountable
Management	Web-based, CLI, SNMP
Ports	24, 48
Port Speed	10/100/1000 Mbps
PoE Support	Available on some models
Switching Capacity	Up to 176 Gbps
MAC Address Table Size	16, 000 entries
Security	ACLs, 802.1X
Quality of Service (QoS)	Yes
Dimensions	Varies by model
Weight	Varies by model
Humidity	10% to 90% non-condensing
Power Supply	Internal
Power Consumption	Varies by model
Jumbo Frame Support	Up to 9216 bytes