Cisco 500 Series Administration Guide

SNMP
Model OIDs
635 Cisco 500 Series Stackable Managed Switch Administration Guide
29
STEP 5 Optionally, enable or disable traps by using the Trap Settings page.
STEP 6 Optionally, define a notification filter(s) by using the Notification Filter page.
STEP 7 Define a notification recipient(s) by using the Notification Recipients SNMPv3
page.
Supported MIBs
For a list of supported MIBs, visit the following URL and navigate to the download
area listed as Cisco MIBS:
www.cisco.com/cisco/software/navigator.html
Model OIDs
The following are the device model Object IDs (OIDs):
Model Name Description Object ID
SF500-24 24-Port 10/ 100 Stackable Managed Switch 9.6.1.80.24.1
SF500-24P 24-Port 10/ 100 PoE Stackable Managed
Switch
9.6.1.80.24.2
SF500-48 48-Port 10/ 100 Stackable Managed Switch 9.6.1.80.48.1
SF500-48P 48-Port 10/ 100 PoE Stackable Managed
Switch
9.6.1.80.48.2
SG500-28 28-Port Gigabit Stackable Managed Switch 9.6.1.81.28.1
SG500-28P 28-Port Gigabit PoE Stackable Managed
Switch
9.6.1.81.28.2
SG500-52 52-Port Gigabit Stackable Managed Switch 9.6.1.81.52.1
SG500-52P 52-Port Gigabit PoE Stackable Managed
Switch
9.6.1.81.52.2
SG500X-24 24-Port Gigabit with 4-Port 10-Gigabit
Stackable Managed Switch
9.6.1.85.24.1
SG500X 24P 24-Port Gigabit with 4-Port 10-Gigabit PoE
Stackable Managed Switch
9.6.1.85.24.2

Cisco 500 Series Specifications

General

Model	Cisco 500 Series
Category	Switch
Mounting	Rack-mountable
Management	Web-based, CLI, SNMP
Ports	24, 48
Port Speed	10/100/1000 Mbps
PoE Support	Available on some models
Switching Capacity	Up to 176 Gbps
MAC Address Table Size	16, 000 entries
Security	ACLs, 802.1X
Quality of Service (QoS)	Yes
Dimensions	Varies by model
Weight	Varies by model
Humidity	10% to 90% non-condensing
Power Supply	Internal
Power Consumption	Varies by model
Jumbo Frame Support	Up to 9216 bytes