Cisco 8811 Administration Guide

Apply a Phone Password 42
Text and Menu Entry from Phone 42
Set up Wireless LAN 43
Set Up Wireless LAN from Cisco Unified Communications Manager 44
Set Up Wireless LAN from Phone 44
Set WLAN Authentication Attempts 47
Enable WLAN Prompt Mode 47
Set Up a Wi-Fi Profile 47
Set Up a Wi-Fi Group 49
Configure Network Settings 50
Load Server 52
Set Up IPv4 53
Set Up IPv6 56
Set Domain Name Field 59
Set Admin VLAN ID Field 59
Set PC VLAN Field 59
Set SW Port Setup Field 60
Set PC Port Setup Field 60
Set Wireless Field 60
Set WLAN Sign In Access Field 60
Set SSID Field 61
Set Security Mode Field 61
Set 802.11 Mode Field 62
Set DHCP Enabled Field 62
Set IP Address Field 63
Set Subnet Mask Field 63
Set Default Router Field 63
Set DNS Server Fields 63
Set Alternate TFTP Field 64
Set TFTP Server 1 Field 64
Set TFTP Server 2 Field 64
Set Up Phone to Use DHCP 64
Set Up Phone to Not Use DHCP 65
Phone Startup Verification 65
Configure Phone Services for Users 66
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
v
Contents

Cisco 8811 Specifications

General

Ethernet Ports	2 x 10/100/1000
Lines Supported	5
Speakerphone	Yes
Headset Port	Yes
USB Port	No
Bluetooth	No
Wi-Fi	No
Resolution	800 x 480 pixels
PoE	Yes, IEEE 802.3af Class 2
Audio Codec Support	G.711, G.722, G.729, iLBC
Protocols	SIP
Display	5-inch, 800 x 480 pixels
Headset Jack	RJ9
Weight	1.1 kg