Step 20
To view all configured user groups, choose User Management > User Group.
Step 21
In the Extension Mobility area, check the Enable Extension Mobility Cross Cluster box if the user is allowed
for Extension Mobility Cross Cluster service.
Step 22
Select Save.
Related Topics
Cisco Unified Communications Manager Documentation, on page xvii
Determine the Phone MAC Address
To add phones to Cisco Unified Communications Manager, you must determine the MAC address of a phone.
Procedure
Perform one of the following actions:
•
On the phone, press Applications , select Phone Information and look at the MAC Address field.
•
Look at the MAC label on the back of the phone.
•
Display the web page for the phone and click Device Information.
Phone Addition Methods
After you install the Cisco IP Phone, you can choose one of the following options to add phones to the Cisco
Unified Communications Manager database.
•
Add phones individually with Cisco Unified Communications Manager Administration
•
Add multiple phones with the Bulk Administration Tool (BAT)
•
Autoregistration
•
BAT and the Tool for Auto-Registered Phones Support (TAPS)
Before you add phones individually or with BAT, you need the MAC address of the phone. For more
information, see Determine the Phone MAC Address, on page 70.
For more information about the Bulk Administration Tool, see the documentation for your particular Cisco
Unified Communications Manager release.
Related Topics
Enable Autoregistration for Phones, on page 38
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
70
Determine the Phone MAC Address
To Next Page
Loading...
Need help?
General
