Cisco Catalyst 2950 Command Reference

Contents
x
Catalyst 2950 and Catalyst 2955 Switch Command Reference
78-11381-12
show storm-control 2-408
show system mtu 2-411
show udld 2-412
show version 2-415
show vlan 2-417
show vmps 2-420
show vtp 2-423
show wrr-queue bandwidth 2-428
show wrr-queue cos-map 2-429
shutdown 2-430
shutdown vlan 2-431
snmp-server enable traps 2-432
snmp-server host 2-436
snmp trap mac-notification 2-440
spanning-tree backbonefast 2-441
spanning-tree bpdufilter 2-442
spanning-tree bpduguard 2-444
spanning-tree cost 2-446
spanning-tree etherchannel guard misconfig 2-448
spanning-tree extend system-id 2-450
spanning-tree guard 2-452
spanning-tree link-type 2-454
spanning-tree loopguard default 2-455
spanning-tree mode 2-457
spanning-tree mst configuration 2-459
spanning-tree mst cost 2-461
spanning-tree mst forward-time 2-463
spanning-tree mst hello-time 2-464
spanning-tree mst max-age 2-465
spanning-tree mst max-hops 2-467
spanning-tree mst port-priority 2-468
spanning-tree mst priority 2-470
spanning-tree mst root 2-471
spanning-tree port-priority 2-473
spanning-tree portfast (global configuration) 2-475

Cisco Catalyst 2950 Specifications

General

Forwarding Bandwidth	8.8 Gbps
Switching Capacity	13.6 Gbps
Forwarding Rate	6.6 Mpps
Weight	3.6 kg
RAM	16 MB
Flash Memory	8 MB
Operating Humidity	10% to 85% non-condensing
Uplink Ports	2 x 10/100/1000Base-T
Dimensions	4.4 cm x 44.5 cm x 24.2 cm
Remote Management Protocol	SNMP, Telnet, HTTP
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p
Status Indicators	system
Operating Temperature	0 to 45°C
Ports	24 x 10/100 Ethernet ports
MAC Address Table Size	8, 192 entries
Power Supply	Internal 100-240V AC, 50-60Hz