Cisco Catalyst 2950 Command Reference

Contents
ix
Catalyst 2950 and Catalyst 2955 Switch Command Reference
78-11381-12
show dot1x 2-322
show env 2-326
show errdisable recovery 2-327
show etherchannel 2-329
show file 2-332
show flowcontrol 2-335
show interfaces 2-337
show interfaces counters 2-346
show inventory 2-349
show ip access-lists 2-350
show ip dhcp snooping 2-352
show ip dhcp snooping binding 2-353
show ip igmp profile 2-355
show ip igmp snooping 2-356
show ip igmp snooping querier detail 2-359
show lacp 2-361
show lre upgrade 2-363
show mac access-group 2-367
show mac address-table 2-370
show mac address-table multicast 2-373
show mac address-table notification 2-375
show mls masks 2-376
show mls qos interface 2-378
show mls qos maps 2-380
show monitor 2-382
show mvr 2-384
show mvr interface 2-385
show mvr members 2-387
show pagp 2-389
show parser macro 2-391
show policy-map 2-394
show port-security 2-396
show rps 2-398
show running-config vlan 2-400
show setup express 2-402
show spanning-tree 2-403

Cisco Catalyst 2950 Specifications

General

Forwarding Bandwidth	8.8 Gbps
Switching Capacity	13.6 Gbps
Forwarding Rate	6.6 Mpps
Weight	3.6 kg
RAM	16 MB
Flash Memory	8 MB
Operating Humidity	10% to 85% non-condensing
Uplink Ports	2 x 10/100/1000Base-T
Dimensions	4.4 cm x 44.5 cm x 24.2 cm
Remote Management Protocol	SNMP, Telnet, HTTP
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p
Status Indicators	system
Operating Temperature	0 to 45°C
Ports	24 x 10/100 Ethernet ports
MAC Address Table Size	8, 192 entries
Power Supply	Internal 100-240V AC, 50-60Hz