Cisco Catalyst 2950 Command Reference

Contents
vii
Catalyst 2950 and Catalyst 2955 Switch Command Reference
78-11381-12
link monitor threshold snr 2-171
local duplex 2-172
local speed 2-173
logging lre 2-174
lre profile 2-175
lre rate selection sequence 2-177
lre sequence 2-179
lre syslog 2-181
lre upbo 2-182
lre upgrade default family 2-184
mac access-group 2-186
mac access-list extended 2-188
mac address-table aging-time 2-190
mac address-table notification 2-192
mac address-table static 2-194
mac address-table static drop 2-196
macro apply 2-198
macro description 2-201
macro global 2-202
macro global description 2-204
macro name 2-205
margin 2-207
match 2-209
media-type 2-211
mls qos cos 2-213
mls qos map 2-215
mls qos trust 2-218
monitor session 2-221
mvr 2-224
mvr immediate 2-227
mvr type 2-228
mvr vlan group 2-230
pagp learn-method 2-232
pagp port-priority 2-234
permit (access-list configuration) 2-235

Cisco Catalyst 2950 Specifications

General

Forwarding Bandwidth	8.8 Gbps
Switching Capacity	13.6 Gbps
Forwarding Rate	6.6 Mpps
Weight	3.6 kg
RAM	16 MB
Flash Memory	8 MB
Operating Humidity	10% to 85% non-condensing
Uplink Ports	2 x 10/100/1000Base-T
Dimensions	4.4 cm x 44.5 cm x 24.2 cm
Remote Management Protocol	SNMP, Telnet, HTTP
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p
Status Indicators	system
Operating Temperature	0 to 45°C
Ports	24 x 10/100 Ethernet ports
MAC Address Table Size	8, 192 entries
Power Supply	Internal 100-240V AC, 50-60Hz