Index
IN-12
Catalyst 3550 Multilayer Switch Command Reference
OL-8566-02
port-based authentication (continued)
switch-to-client frame-retransmission number 2-97,
2-98
switch-to-client retransmission time 2-106
port-channel load-balance command 2-287
Port Fast, for spanning tree 2-555
port labels 2-360, 2-363, 2-480
port ranges, defining 2-69
ports, debugging B-32
ports, protected 2-597
port security
aging 2-593
debug messages, display B-34
enabling 2-589
violation error recovery 2-113
port trust states for QoS 2-258
port types, MVR 2-268
power information, displaying 2-346
power inline command 2-289
Power over Ethernet
See PoE
priority-queue command 2-291
privileged EXEC mode 1-2, 1-3
product identification information, displaying 2-381
protected ports, displaying 2-377
pruning
VLANs 2-598
VTP
displaying interface information 2-371
enabling 2-646, 2-650, 2-652
PVST+
See STP
Q
QoS
automatic configuration 2-20
class maps
creating 2-40
defining the match criteria 2-235
displaying 2-322
defining the CoS value for an incoming packet 2-245
displaying configuration information 2-317, 2-438
DSCP trusted ports
applying DSCP-to-DSCP-mutation map to 2-249
defining DSCP-to-DSCP-mutation map 2-251
enabling 2-240
maps
defining 2-251
displaying 2-444
policy maps
applying an aggregate policer 2-282
applying to an interface 2-305, 2-309
creating 2-284
defining CoS 2-247
defining policers 2-243, 2-280
displaying policers 2-439, 2-440
displaying policy maps 2-459
policed-DSCP map 2-251
setting DSCP or IP precedence values 2-307
traffic classifications 2-38
trust states 2-612
port trust states 2-258
queues
CoS-to-egress-queue map 2-658
displaying buffer settings 2-440
displaying queueing strategies 2-440
enabling the expedite 2-291
mapping DSCPs to thresholds 2-660
minimum-reserve level 2-662
minimum-reserve level buffer sizes 2-255
ratio of queue sizes 2-663
To Next Page
Loading...
