B-103
Catalyst 3750 Switch Command Reference
OL-8552-07
Appendix B Catalyst 3750 Switch Debug Commands
debug sw-vlan vtp
If no further parameters are entered after the pruning keyword, VTP pruning debugging messages
appear. They are generated by the VTP_PRUNING_LOG_NOTICE, VTP_PRUNING_LOG_INFO,
VTP_PRUNING_LOG_DEBUG, VTP_PRUNING_LOG_ALERT, and
VTP_PRUNING_LOG_WARNING macros in the VTP pruning code.
Related Commands Command Description
show debugging Displays information about the types of debugging that are enabled.
show vtp Displays general information about VTP management domain, status, and
counters.
To Next Page
Loading...
