2-12
Catalyst 3750 Switch Command Reference
OL-8552-07
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
archive download-sw
Defaults The current software image is not overwritten with the downloaded image.
Both the software image and HTML files are downloaded.
The new image is downloaded to the flash: file system.
The BOOT environment variable is changed to point to the new software image on the flash: file system.
Image names are case sensitive; the image file is provided in tar format.
Compatibility of the stack protocol version on the image to be downloaded is checked with the version
on the stack.
Command Modes Privileged EXEC
Command History
source-url The source URL alias for a local or network file system. These options are
supported:
• The syntax for the secondary boot loader (BS1):
bs1:
• The syntax for the local flash file system on the standalone switch or
the master:
flash:
The syntax for the local flash file system on a member:
flash member number:
• The syntax for the FTP:
ftp:[[//username[:password]@location]/directory]/image-name.tar
• The syntax for an HTTP server:
http://[[username:password]@]{hostname |
host-ip}[/directory]/image-name.tar
• The syntax for a secure HTTP server:
https://[[username:password]@]{hostname |
host-ip}[/directory]/image-name.tar
• The syntax for the Remote Copy Protocol (RCP):
rcp:[[//username@location]/directory]/image-name.tar
• The syntax for the TFTP:
tftp:[[//location]/directory]/image-name.tar
The image-name.tar is the software image to download and install on the
switch.
Release Modification
12.1(11)AX This command was introduced.
12.2(20)SE The http and https keywords were added.
12.2(35)SE The allow-feature-upgrade and directory keywords were added.
To Next Page
Loading...
