Cisco Catalyst 3750 - Clear Mac Address-Table

2-83
Catalyst 3750 Switch Command Reference
OL-8552-07
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
clear mac address-table
clear mac address-table
Use the clear mac address-table privileged EXEC command to delete from the MAC address table a
specific dynamic address, all dynamic addresses on a particular interface, all dynamic addresses on stack
members, or all dynamic addresses on a particular VLAN. This command also clears the MAC address
notification global counters.
clear mac address-table {dynamic [address mac-addr | interface interface-id | vlan vlan-id] |
notification}
Syntax Description
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Examples This example shows how to remove a specific MAC address from the dynamic address table:
Switch# clear mac address-table dynamic address 0008.0070.0007
You can verify that the information was deleted by entering the show mac address-table privileged
EXEC command.
Related Commands
dynamic Delete all dynamic MAC addresses.
dynamic address
mac-addr
(Optional) Delete the specified dynamic MAC address.
dynamic interface
interface-id
(Optional) Delete all dynamic MAC addresses on the specified physical port
or port channel.
dynamic vlan vlan-id (Optional) Delete all dynamic MAC addresses for the specified VLAN. The
range is 1 to 4094.
notification Clear the notifications in the history table and reset the counters.
Release Modification
12.1(11)AX This command was introduced.
12.1(19)EA1 The clear mac-address-table command (with the hyphen) was replaced by
the clear mac address-table command (without the hyphen).
Command Description
mac address-table notification Enables the MAC address notification feature.
show mac access-group Displays the MAC address table static and dynamic entries.