Cisco Catalyst 3750 User Manual

2-904
Catalyst 3750 Switch Command Reference
OL-8552-07
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
vmps reconfirm (privileged EXEC)
vmps reconfirm (privileged EXEC)
Use the vmps reconfirm privileged EXEC command to immediately send VLAN Query Protocol (VQP)
queries to reconfirm all dynamic VLAN assignments with the VLAN Membership Policy Server
(VMPS).
vmps reconfirm
Syntax Description This command has no arguments or keywords.
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Examples This example shows how to immediately send VQP queries to the VMPS:
Switch# vmps reconfirm
You can verify your setting by entering the show vmps privileged EXEC command and examining the
VMPS Action row of the Reconfirmation Status section. The show vmps command shows the result of
the last time the assignments were reconfirmed either because the reconfirmation timer expired or
because the vmps reconfirm command was entered.
Related Commands
Release Modification
12.1(11)AX This command was introduced.
Command Description
show vmps Displays VQP and VMPS information.
vmps reconfirm (global
configuration)
Changes the reconfirmation interval for the VQP client.

Cisco Catalyst 3750 Specifications

General

Device Type	Switch
Switching Capacity	32 Gbps
Forwarding Rate	38.7 Mpps
Stacking Bandwidth	32 Gbps
RAM	128 MB
Jumbo Frame Support	Yes
Switch Type	Managed
Model	Catalyst 3750 Series
Uplink Interfaces	SFP
Form Factor	Rack-mountable
MAC Address Table Size	12, 000 entries
Routing Protocol	RIP, OSPF, EIGRP
Remote Management Protocol	SNMP, Telnet, HTTP
Features	Layer 3 switching, Layer 2 switching, auto-negotiation, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, MAC address filtering, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), Cisco EnergyWise technology
Power over Ethernet (PoE)	PoE
Operating Temperature	-5 - 45 °C
Operating Humidity	10% to 85% non-condensing