Cisco Catalyst 3750 - Show Mac Address-Table Vlan

2-656
Catalyst 3750 Switch Command Reference
OL-8552-07
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
show mac address-table static
Examples This is an example of output from the show mac address-table static command:
Switch> show mac address-table static
Mac Address Table
------------------------------------------
Vlan Mac Address Type Ports
---- ----------- ---- -----
All 0100.0ccc.cccc STATIC CPU
All 0180.c200.0000 STATIC CPU
All 0100.0ccc.cccd STATIC CPU
All 0180.c200.0001 STATIC CPU
All 0180.c200.0004 STATIC CPU
All 0180.c200.0005 STATIC CPU
4 0001.0002.0004 STATIC Drop
6 0001.0002.0007 STATIC Drop
Total Mac Addresses for this criterion: 8
Related Commands Command Description
mac address-table static Adds static addresses to the MAC address table.
mac address-table static drop Enables unicast MAC address filtering and configures the
switch to drop traffic with a specific source or destination
MAC address.
show mac address-table address Displays MAC address table information for the specified
MAC address.
show mac address-table aging-time Displays the aging time in all VLANs or the specified
VLAN.
show mac address-table count Displays the number of addresses present in all VLANs or
the specified VLAN.
show mac address-table dynamic Displays dynamic MAC address table entries only.
show mac address-table interface Displays the MAC address table information for the
specified interface.
show mac address-table notification Displays the MAC address notification settings for all
interfaces or the specified interface.
show mac address-table vlan Displays the MAC address table information for the
specified VLAN.