EasyManuals Logo

Cisco Catalyst 3750 User Manual

Cisco Catalyst 3750
1154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
2-5
Catalyst 3750 Switch Command Reference
OL-8552-07
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
aaa authorization network
aaa authorization network
Use the aaa authorization network global configuration command to the configure the switch to use
user-RADIUS authorization for all network-related service requests, such as IEEE 802.1x per-user
access control lists (ACLs) or VLAN assignment. Use the no form of this command to disable RADIUS
user authorization.
aaa authorization network default group radius
no aaa authorization network default
Syntax Description
Defaults Authorization is disabled.
Command Modes Global configuration
Command History
Usage Guidelines Use the aaa authorization network default group radius global configuration command to allow the
switch to download IEEE 802.1x authorization parameters from the RADIUS servers in the default
authorization list. The authorization parameters are used by features such as per-user ACLs or VLAN
assignment to get parameters from the RADIUS servers.
Use the show running-config privileged EXEC command to display the configured lists of
authorization methods.
Examples This example shows how to configure the switch for user RADIUS authorization for all network-related
service requests:
Switch(config)# aaa authorization network default group radius
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands
default group
radius
Use the list of all RADIUS hosts in the server group as the default authorization
list.
Release Modification
12.1(11)AX This command was introduced.
Command Description
show running-config Displays the current operating configuration. For syntax information, select
Cisco IOS Configuration Fundamentals Command Reference, Release
12.2 > File Management Commands > Configuration File Management
Commands.

Table of Contents

Other manuals for Cisco Catalyst 3750

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Catalyst 3750 and is the answer not in the manual?

Cisco Catalyst 3750 Specifications

General IconGeneral
Device TypeSwitch
Switching Capacity32 Gbps
Forwarding Rate38.7 Mpps
Stacking Bandwidth32 Gbps
RAM128 MB
Jumbo Frame SupportYes
Switch TypeManaged
ModelCatalyst 3750 Series
Uplink InterfacesSFP
Form FactorRack-mountable
MAC Address Table Size12, 000 entries
Routing ProtocolRIP, OSPF, EIGRP
Remote Management ProtocolSNMP, Telnet, HTTP
FeaturesLayer 3 switching, Layer 2 switching, auto-negotiation, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, MAC address filtering, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), Cisco EnergyWise technology
Power over Ethernet (PoE)PoE
Operating Temperature-5 - 45 °C
Operating Humidity10% to 85% non-condensing

Related product manuals