Cisco Catalyst 3750 User Manual

C-48
Catalyst 3750 Switch Command Reference
OL-8552-07
Appendix C Catalyst 3750 Switch Show Platform Commands
show platform wireless-controller
show platform wireless-controller
Use the show platform wireless-controller privileged EXEC command to display information about
the internal wireless controller in a Catalyst 3750G Integrated Wireless LAN Controller Switch.
show platform wireless-controller [management-info | status | summary] [switch-number]
[ | {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Enter the show platform wireless-controller commands to determine the stack number of the switch or
switches in the stack that contain the integrated wireless LAN controller. The command outputs also
display the MAC address and IP address of the controller to be used in accessing and configuring the
controller.
This command applies only to the Catalyst 3750G Wireless Controller Switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
management-info (Optional) Display information about the management interface of the wireless
controller.
status (Optional) Display wireless controller status information.
summary (Optional) Display wireless controller summary information.
switch-number (Optional) Display wireless controller information for the specified stack
member. The range is from 1 to 9.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(25)FZ This command was introduced.

Cisco Catalyst 3750 Specifications

General

Device Type	Switch
Switching Capacity	32 Gbps
Forwarding Rate	38.7 Mpps
Stacking Bandwidth	32 Gbps
RAM	128 MB
Jumbo Frame Support	Yes
Switch Type	Managed
Model	Catalyst 3750 Series
Uplink Interfaces	SFP
Form Factor	Rack-mountable
MAC Address Table Size	12, 000 entries
Routing Protocol	RIP, OSPF, EIGRP
Remote Management Protocol	SNMP, Telnet, HTTP
Features	Layer 3 switching, Layer 2 switching, auto-negotiation, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, MAC address filtering, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), Cisco EnergyWise technology
Power over Ethernet (PoE)	PoE
Operating Temperature	-5 - 45 °C
Operating Humidity	10% to 85% non-condensing