EasyManuals Logo

Cisco Catalyst 3750 User Manual

Cisco Catalyst 3750
1154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #202 background imageLoading...
Page #202 background image
2-172
Catalyst 3750 Switch Command Reference
OL-8552-07
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
energywise (interface configuration)
energywise (interface configuration)
Use the energywise interface configuration command to configure EnergyWise on the power over
Ethernet (PoE) port. Use the no form of this command to disable EnergyWise and to remove the
EnergyWise configuration.
energywise [importance importance | keywords word,word,... | level level [recurrence at minute
hour day_of_month month day_of_week] | name name | role role]
no energywise [importance | keywords | level | name | role]
Syntax Description importance importance (Optional) Set the importance of the port.
The range is from 1 to 100.
keywords word,word,... Assign at least one keyword for the port.
When assigning multiple keywords, separate the keywords with commas,
and do not use spaces between keywords.
You can enter alphanumeric characters and symbols such as #, (, %, !, or
&.
Do not use an asterisk (*) or a blank space between the characters and
symbols.
level level (Optional) Set the power level of the port.
The range is from 0 and 10.
If the power level is 0, the port is powered off.
If the power level is from 1 to 10, the port is powered. You can enter any
value this range to power the PoE port.
recurrence
importance importance
at minute hour
day_of_month month
day_of_week
(Optional) Schedule the power-on or power-off recurrence.
importance importance—Set the importance of the port in the domain.
The range is from 1 to 100.
minute—The range is from 0 to 59. Use * for the wildcard.
hour—The range is from 0 to 23. Use * for the wildcard.
day_of_month—The range is from 1 to 31. Use * for the wildcard.
month—The range is from 1 (January) to 12 (December). Use * for the
wildcard.
day_of_week—The range is from 0 (Sunday) to 6 (Saturday). Use * for
the wildcard.
Note The specified times are local times based on the PoE-entity time
zone.

Table of Contents

Other manuals for Cisco Catalyst 3750

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Catalyst 3750 and is the answer not in the manual?

Cisco Catalyst 3750 Specifications

General IconGeneral
Device TypeSwitch
Switching Capacity32 Gbps
Forwarding Rate38.7 Mpps
Stacking Bandwidth32 Gbps
RAM128 MB
Jumbo Frame SupportYes
Switch TypeManaged
ModelCatalyst 3750 Series
Uplink InterfacesSFP
Form FactorRack-mountable
MAC Address Table Size12, 000 entries
Routing ProtocolRIP, OSPF, EIGRP
Remote Management ProtocolSNMP, Telnet, HTTP
FeaturesLayer 3 switching, Layer 2 switching, auto-negotiation, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, MAC address filtering, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), Cisco EnergyWise technology
Power over Ethernet (PoE)PoE
Operating Temperature-5 - 45 °C
Operating Humidity10% to 85% non-condensing

Related product manuals