CHAPTER
2-1
Catalyst 3750 Switch Command Reference
OL-8552-07
2
Catalyst 3750 Switch Cisco IOS Commands
aaa accounting dot1x
Use the aaa accounting dot1x global configuration command to enable authentication, authorization,
and accounting (AAA) accounting and to create method lists defining specific accounting methods on a
per-line or per-interface basis for IEEE 802.1x sessions. Use the no form of this command to disable
IEEE
802.1x accounting.
aaa accounting dot1x {name | default} start-stop {broadcast group {name | radius | tacacs+}
[group {name | radius | tacacs+}...] | group {name | radius | tacacs+} [group {name | radius
| tacacs+}...]}
no aaa accounting dot1x {name | default}
Syntax Description name Name of a server group. This is optional when you enter it after the
broadcast group and group keywords.
default Use the accounting methods that follow as the default list for accounting
services.
start-stop Send a start accounting notice at the beginning of a process and a stop
accounting notice at the end of a process. The start accounting record is sent
in the background. The requested-user process begins regardless of whether
or not the start accounting notice was received by the accounting server.
broadcast Enable accounting records to be sent to multiple AAA servers and send
accounting records to the first server in each group. If the first server is
unavailable, the switch uses the list of backup servers to identify the first
server.
group Specify the server group to be used for accounting services. These are valid
server group names:
• name—Name of a server group.
• radius—List of all RADIUS hosts.
• tacacs+—List of all TACACS+ hosts.
The group keyword is optional when you enter it after the broadcast group
and group keywords. You can enter more than optional group keyword.
radius (Optional) Enable RADIUS authorization.
tacacs+ (Optional) Enable TACACS+ accounting.
To Next Page
Loading...
Need help?
General
