2-731
Catalyst 3750 Switch Command Reference
OL-8552-07
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
show vlan access-map
show vlan access-map
Use the show vlan access-map privileged EXEC command to display information about a particular
VLAN access map or for all VLAN access maps.
show vlan access-map [mapname] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show vlan access-map command:
Switch# show vlan access-map
Vlan access-map "SecWiz" 10
Match clauses:
ip address: SecWiz_Gi0_3_in_ip
ip address: SecWiz_Fa10_3_in_ip
Action:
forward
mapname (Optional) Name of a specific VLAN access map.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.1(11)AX This command was introduced.
To Next Page
Loading...
