Cisco Catalyst 3750 - Cisco_Phone_Event; Cisco_Switch_Event; Cisco_Router_Event; Cisco_Wireless_Ap_Event

2-484
Catalyst 3750 Switch Command Reference
OL-8552-07
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
shell trigger
shell trigger
Use the shell trigger global configuration command to create an event trigger. Use the no form of this
command to delete the trigger.
shell trigger identifier description
no shell trigger identifier description
Syntax Description
Defaults There are system-defined event triggers:
• CISCO_PHONE_EVENT
• CISCO_SWITCH_EVENT
• CISCO_ROUTER_EVENT
• CISCO_WIRELESS_AP_EVENT
• CISCO_WIRELESS_LIGHTWEIGHT_AP_EVENT
Command Modes Global configuration
Command History
Usage Guidelines Use this command to create user-defined event triggers for use with the macro auto execute global
configuration command.
To support dynamic device discovery when using 802.1x authentication, configure the RADIUS
authentication server to support the Cisco attribute-value (av) pair: auto-smart-port=event trigger
Examples This example shows how to create a user-defined event trigger called RADIUS_MAB_EVENT:
Switch# configure terminal
Switch(config)# shell trigger RADIUS_MAB_EVENT MAC_AuthBypass Event
Switch(config)# end
identifier Specify the event trigger identifier. The identifier should have no spaces or
hyphens between words.
description Specify the event trigger description text.
Release Modification
12.2(50)SE This command was introduced.