C-13
Catalyst 3750 Switch Command Reference
OL-8552-07
Appendix C Catalyst 3750 Switch Show Platform Commands
show platform ip unicast
Command History
Usage Guidelines You should use this command only when you are working directly with a technical support
representative while troubleshooting a problem. Do not use this command unless a technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Release Modification
12.1(11)AX This command was introduced.
To Next Page
Loading...
